Established in 1988

fasteners1-866-895-0627

Wire Rope Hardware

Wire Rope Hardware

Have AQuestion

Wire Rope Thimbles are used for distributing weight evenly around the loop, and protect wire rope assemblies from damage and wear. Zinc-plated steel thimbles provide good corrosion resistance in most environments. For better corrosion resistance, choose hot-dipped galvanized steel thimbles that have a thicker zinc coating.

Type 304 and 316 stainless steel thimbles exhibit excellent corrosion resistance. Wire Rope Clips are malleable iron clips are good where corrosion is not a factor.

Forged steel clips are stronger than malleable iron clips and is also good for applications where corrosion is not a factor. Hand held models are sued to cut smaller wire rope diameters including safety wire, truck and rail security cables. Hydraulic wire rope cutters are made to cut the toughest cables, clean and without affecting the roundness of the wire rope. Impact cutters are portable, easy to operate, and are actuated by using a hammer and striking a few hard blows to effect a perfect cut.

Wire Rope Hardware Inventory

Filter Results By:

Diameter
Coating / Plating

Sort Options:

per page
Set Descending Direction
  • Name
  • Diameter
  • Thread
  • Length
  • Add to Quote
  1. Diameter: 1/16
    Thread:
    Length:
  2. Diameter: 1/8
    Thread:
    Length:
  3. Diameter: 1/8
    Thread:
    Length:
  4. Diameter: 1/8
    Thread:
    Length:
  5. Diameter: 1/8
    Thread:
    Length:
  6. Diameter: 1/8
    Thread:
    Length:
  7. Diameter: 1/8
    Thread:
    Length:
  8. Diameter: 1/8
    Thread:
    Length:
  9. Diameter: 3/16
    Thread:
    Length:
  10. Diameter: 3/16
    Thread:
    Length:

Items 1 to 10 of 113 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Click here to Request a Quote

or call us today at 1-866-895-0627 to inquire about a quote from U-Bolt-It

March 7, 2016, 4:06pm Let me put it this way: January started my 37th year in this business, (I’ll be 55 in June, so I started when I got out of high school). Nobody ever calls when you go over and above and get them out of a bind. You can fill 99 out of 100 items, and they will call and bitch about that one item. Very seldom do they let you know how you got them out of a bind., or did the extra for them, or stayed late or delivered stuff on the weekends, etc. They have come to take it for granted, but I suppose we created the monster by the service level we maintain. And service is what we have that the big guys do not. John Wilson, there at U-Bolt It, did a fantastic job for us. I figure the sizes and quantities we were requesting were a little of a shocker, but John was all over it. And we appreciate all that he did. All of these SS U-Bolts were for our nuclear plant here in Mississippi. They went on re-fuel outage a couple of weeks ago, which they do every two years. And when they go on an outage, it is wide open for about a month. Cost doesn’t matter, freight doesn’t matter, get it here, and get it here fast. I’ve been through about 10 of these outages, and they never plan ahead very well. So compliments are in order for John and whoever else there did these for us. U-Bolt It did an exceptional job and we do appreciate it. Anything else comes up like this, you will be the first on the list. Let me add this though…..I’m not totally convinced that John went out in the plant and got his hands dirty….just saying

– M.